Classes & Cardio Activities
Alongside sets-and-reps exercises, Datum can log a duration-based activity — a gym class (yoga, spin, HIIT) or a cardio-machine session (treadmill, elliptical, stair climber). An activity has no sets or reps, just a duration and, when available, heart rate and an estimated calorie figure.
An activity can stand on its own — a full class with nothing else logged — or sit inside an otherwise-normal strength session, like a 10-minute treadmill warm-up before you lift. Either way, it's logged the same way and shows up the same places.
Starting an activity right away#
Don't want to start a whole workout just to log a run or a class? On the Train tab, tap Start an activity. This opens the activity picker directly — pick one, and you're offered the same choice as anywhere else: live-tracked or after the fact. There's no need to start a freeform workout or open a template first. Adding an activity from inside a template or an active workout still works exactly as described below.
Favoriting an activity type#
Tap the star next to any activity in the picker to favorite it. Favorited activities show up in their own Favorites section at the top of the picker, in addition to their usual class/cardio/ outdoor group below — favoriting doesn't move it, it just adds a shortcut.
Planning an activity into a template#
Open a template and tap Add, then Add activity (the same menu as adding an exercise — see Plans & Templates). Pick an activity type from the picker, grouped by class vs. cardio machine, and optionally set a target duration. As with exercise targets, this is a plan, not a commitment — you're free to log something different when you actually do it.
Logging an activity#
Whether an activity was planned or you're adding one on the fly during a workout (tap Add on the active workout screen, then Add activity, the same as adding an unplanned exercise), it's logged one of two ways:
Live-tracked#
Tap into the activity and tap Start Activity. Datum shows a live elapsed-time counter and, if a heart rate source is available, your current heart rate (see below). Tap Stop Activity when you're done. The timer keeps running correctly even if you page away to another exercise, background the app, or relaunch it mid-activity — Datum tracks the real start time, not just how long the screen's been open.
After the fact#
Forgot to start the timer, or logging a class after it's over? Tap Log after the fact instead (or Edit start time / duration for one already logged) and enter a start time and duration directly — duration in whole minutes, since logging something after the fact means recalling it, not timing it to the second. Datum then looks up heart rate for that time window from Apple Health, the same as it would for a live-tracked one, and works out the calories itself.
A workout that holds only classes or cardio takes its start, end and duration from the activities in it (the earliest start to the latest end), so History and the calendar file it under when you actually did it, not when you typed it in. It has no calorie figure of its own: each activity shows its own, and a workout with several activities (that don't overlap in time) also shows their total. Workouts logged this way on earlier versions are corrected the next time Datum opens. A workout that also has exercises keeps its own times.
Heart rate during an activity#
While an activity is running, Datum shows your live heart rate if it has a source for it:
- A generic Bluetooth heart rate monitor, connected from Settings — see below.
- Apple Health, if a connected device (like an Apple Watch) is already writing heart rate data there in real time.
If neither is available, the activity screen shows a dismissible "No heart rate monitor connected" notice instead of leaving the space blank — tap the × to dismiss it for that activity. This never blocks logging; heart rate is always optional.
Datum does not connect directly to Whoop, Garmin, or any other wearable brand's own app or API — the only paths in are a paired Bluetooth heart rate monitor or whatever a device has already written into Apple Health (see Apple Health Integration). If you wear a device that only syncs to Apple Health in batches rather than live (Whoop is the common example), its heart rate will show up after the fact — through the after-the-fact logging path or a backfill into a live-tracked activity's average/max — rather than live during the activity itself.
Calories for an activity#
Datum works out an activity's calories itself and labels the figure Calories (estimate). It never uses a calorie total that another app (Whoop, Strava, Peloton and so on) wrote to Apple Health. Only an Apple Watch's own measured energy counts as measured. Otherwise, in this order:
- Your heart rate, from any source (a Bluetooth monitor, an Apple Watch, Whoop or another device that writes heart rate to Health), with your resting heart rate, age and bodyweight.
- GPS distance, time and climbing, for a tracked walk, run, hike or ride, using published walking, running and cycling equations.
- A typical effort for that kind of activity, your bodyweight and how long it lasted. This is the roughest figure. The values come from the Compendium of Physical Activities, rounded down, and lowered for hiking, walking, running and indoor cycling where they ran high against real workouts.
All of these count active calories only, the same way Apple Health does, and they always round down. Checked against one person's 39 hikes whose own wrist tracker had measured the calories, the heart-rate method landed within about 6% at the median. Walking and cycling have too few checked examples to say how accurate they are, and the distance and typical-effort methods come from published equations rather than from real-data checks. Treat every figure as an estimate. The figure is worked out each time you open the activity, because heart rate from a wearable often reaches Apple Health minutes after you finish.
Connecting a Bluetooth heart rate monitor (Experimental)#
In Settings, under Heart Rate Monitor (Experimental), tap Pair a Heart Rate Monitor. Datum scans, lists the monitors it finds, and you tap yours. This works with any monitor that supports the standard Bluetooth heart rate service, not a specific brand. Datum remembers the monitor on this phone, so you only pair once; Forget This Monitor removes it.
After that, Connect in the same section decides when Datum connects:
- When I start a workout (the default). Datum connects when any workout or activity starts or resumes, and lets go when the last one is finished or discarded, to save the monitor's battery.
- Whenever Datum is running. Datum stays connected, and if the monitor drops (you walk away, or it is switched off and on) it keeps waiting and reconnects when the monitor returns. It also reconnects after Datum was closed by iOS, where iOS allows it.
- Manual. You connect and disconnect from Settings yourself.
In the first two modes Datum reconnects on its own if the connection drops unexpectedly, but never after you disconnected on purpose. If a monitor keeps connecting and dropping, Datum waits a little longer between attempts (up to 30 seconds) rather than hammering it. If Bluetooth is switched off and on again, Datum picks the connection back up.
Once connected, its live reading appears on the workout and activity screens, and Datum saves the readings with that workout (on your device, and in your private iCloud account if sync is on) so it can estimate the calories from them. Last disconnected in Settings shows when the monitor last dropped and why.
This is marked experimental because the connection has not yet been checked against real monitors in every situation (locked screen, Datum in the background, Datum closed, strap out of range). Everything else in this guide works fully without one. Heart rate is always optional, and after-the-fact logging pulls from Apple Health either way.
GPS route tracking for outdoor activities#
Walking, running, hiking, cycling, and open-water swimming — the outdoor, point-to-point activities — get GPS route tracking. This is separate from other outdoor-ish entries like jump rope, which stay in one place rather than covering a route, so they don't get a map.
While live-tracking one of these, Datum shows a map drawing your route as you move, along with live distance, pace, elevation gain, and step count, updating alongside your heart rate if a source is connected. Tracking keeps recording GPS even while your phone is locked, as long as you started the activity yourself — you don't need to keep the screen on or Datum in the foreground.
When you tap Stop Activity, you get a summary: the completed route on a map, plus total distance, duration, pace, elevation gain, average/max heart rate, and steps.
Logging one of these after the fact works the same as any other activity, with one difference: since there's no GPS trail to reconstruct, you can optionally enter distance and elevation gain yourself alongside the start time and duration. There's no map for a manually logged activity.
In Apple Health, a route-tracked activity's GPS path is written as part of its workout entry, the same way apps like Apple's own Fitness app record a route — not just a distance number, an actual map you can look back on later.
Datum asks for location and motion (step-counting) access the first time you start a live-tracked outdoor activity. Both are used only while an activity is running, never in the background outside of one you started yourself.
Saved routes#
If you ride, run or walk the same way more than once, you can save that route and Datum will compare your rides on it, with a fastest time record.
Saving a route. Open a finished, live-tracked ride in History and tap Save as route, then name it. Datum keeps its own simplified copy of the path (a few hundred points, no times), so deleting or editing the ride you saved it from never breaks the route. The moment you save, Datum looks back through your earlier rides and counts the ones that followed the same route, so the route starts with its real history. That search runs in the background; on a long history the rides can take a few seconds to appear on the route's page.
Which rides count. A ride counts as being on a route when it is the same kind of activity and:
- it starts and ends within about 150 meters (500 feet) of the route's start and end;
- at least 90% of the ride stays within about 50 meters (165 feet) of the saved path;
- its distance is within 15% of the route's; and
- it goes the same way round. A loop ridden backwards starts and ends in the same places, but it is not counted.
If two saved routes both fit, Datum offers the closer one. Rides logged after the fact have no GPS path, so they never match.
The check. Right after you stop a ride that follows a saved route, and again at the top of that ride in History, Datum asks This looks like Lake Loop. Count it? Tap Yes to count it, or No and it won't ask again. A ride you said No to, or removed from a route, shows Count it on that route so you can undo it.
The record. A route's record is its fastest time. When a ride beats every earlier ride on the route, it gets a gold medal and a line like "New fastest time on Lake Loop: 41:12 (was 42:30)" on the activity screen, in History and in the workout recap. The first ride on a route sets a time but isn't a record, and a tie isn't one. A later, faster ride doesn't take the medal away from a ride that was a record when you rode it. Lifting records keep their violet PR tag; the gold medal is only for routes.
Seeing your routes. Reports lists every saved route with its ride count and fastest time. A route's page shows its map, distance, the fastest time and every ride on it, newest first, with the medal on the fastest. Tap the name to rename it. Swipe a ride (or press and hold it) to take it off the route if it was matched wrongly; the ride stays in History. Delete route removes the route only, never the rides.
Privacy. A route can start and end where you live. It is stored on your device, and in your private iCloud account if you turn on iCloud sync, like the rest of your data. See the Privacy Policy.
Where activities show up#
- History — an activity appears in History the same as any workout: standalone activities get their own entry, and an embedded activity shows alongside the strength exercises in the session it was part of.
- Reports — total minutes per activity type, and a trend of activity minutes per session over time — see Reports.
- Apple Health — each logged activity is written as its own workout entry, tagged with the right activity type (yoga, cycling, running, and so on) — see Apple Health Integration.